Product Image
 

251 - Slope Base Flange 30

Base flange for sloping sites, adjustable from 30° to 45°. As the fixing holes in the base cannot be fixed in line with the applied load, it is only intended for light loads or structures which are sufficiently supported by virtue of their design. Where a greater load is required, type 132 is normally used, with the upright tube bent to the required angle.

(See clamp 132).

Fixing holes suit a wide range of common mechanical and chemical masonry Fixing holes suit a wide range of common mechanical and chemical masonry anchors which we should be pleased to quote for on request. The dimensions of the base are designed to be compatible with many traditional welded ball standard bases to allows easy interchangeability.

Why not take advantage of the BEVERLEY STEEL free design service. We can convert your rough sketch into a finished product. For more information on this service please call us on 01252 523060.

 

 

Product Data & Dimensions

 

     

 

Size a b c d e Weight Box Qty*
  mm mm mm mm mm (KG)  
B34 172 65 126     1.03 24
C42 172 65 126     1.21 20
D48 172 65 126     1.28 22

 


Home   |    Contact Us

Copyright © 2015. All Rights Reserved | Designed and powered by JDR Group Web Design